 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Pomona (R) Model 6384 & Assembly Instructions Banana Jack, User Installed (18-22 AWG) FEATURES: * Attaches to your wire with commonly available crimp tools or by soldering. * Can be used on stranded wire from 18 to 22 AWG with an insulation diameter from 0.060" to 0.150". * Provides safe and secure connections to 4mm shrouded banana plugs. * Fits Pomona shrouded banana plugs and most other shrouded banana plugs, will also fit most banana plugs without shrouds. * Will comply with IEC1010 CAT II, 300V when properly assembled. MATERIALS: Banana Jack: Nickel Plated Brass. Insulation: Santoprene(R) (Thermoplastic Elastomer). RATINGS: Operaging Voltage: 300V Max. (Hand Held); 1,500V Max. (Non-Hand Held) Current: 5 Amperes 20-22 AWG, 15 Amperes 18 AWG Operating Temperature: -20F to 275F (-29C to 135C) Storage: -40F to 302F (-40C to 150C) ORDERING INFORMATION: Model 6384-(*). * = Color, (-0) Black, (-2) Red, (10 per package). (-02) 1 of each color. All dimensions are in inches. Tolerances (except noted): .xx = .02" (,51 mm), .xxx = .005" (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 PomonaACCESS 90836 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 1 of 1 T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\d6384_2_01.doc Pomona (R) Model 6384 & Assembly Instructions Banana Jack, User Installed (18-22 AWG) FIGURE #1 A. Slide plastic housing over wire. B. Place stripped wire (18, 20, or 22 AWG) end into terminal hole. FIGURE #2 C. Crimp terminal using a bare-terminal style crimper. Retention force of joint should exceed 12 pounds to assure no damage occurs to joint when housing is snapped into place. All dimensions are in inches. Tolerances (except noted): .xx = .02" (,51 mm), .xxx = .005" (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 PomonaACCESS 90836 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 2 of 2 T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\d6384_2_01.doc Pomona (R) Model 6384 & Assembly Instructions Banana Jack, User Installed (18-22 AWG) FIGURE #3 D. Slide housing over jack and pull on wire until snap engages. All dimensions are in inches. Tolerances (except noted): .xx = .02" (,51 mm), .xxx = .005" (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 PomonaACCESS 90836 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 3 of 3 T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\d6384_2_01.doc |
Price & Availability of 6384
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |